Intercom Two SIP lines, supporting SIP 2.0 (RFC3261) and related RFC Supports two lines RTSP Voice broadcast IP address Button or remote volume adjustment Switch signal input and output Talkback recording output Handsfree talking Default auto answer Dynamic multicast function Supports DC or POE power supply Support for Function key interface Support monophonic active speakers Network time synchronization Action URL / Active URI remote control Audio Features Narrowband speech codec: G.711a / u, G.723.1, G.726-32K, G.729AB Broadband speech codec: G.722 Full Duplex Echo Cancellation (AEC) DTMF: In-band, out-of-band DTMF (RFC2833) / SIP Info Networking & Protocols Support PoE (802.3af) Primary and secondary DNS servers are supported Support VLAN Support SNTP client Support VPN L2TP / PPTP / IPSec Support SRTP Support HTTP / HTTPS web pages Support Qos: 802.1p / q, DSCP Support MD5 authentication Support Web Filter DHCP / static / PPPoE Support STUN Physical Specifications 2 RJ45 interface: Yellow: WAN port 10 / 100M adaptive, support POE PoE: 802.3af (Class 3: 6.49 ~ 12.95W) Black: LAN port (Only connected to the original camera) Cable: Super five lines or better 1 blue indicator (SIP status andnetwork status) 2 volume plus or minus key 1 restore factory settings key 1 recording output interface: 3.5mm standard audio interface 15 Ohm impedance 1 ground screw 1 way passive speaker interface: Output power: 4Ω, POE / 10W, 12V /10W,18V / 20W, 24V / 30W; related tosupply voltage. Wire diameter: 18 AWG or larger diameter Interface:Pluggable terminal block 1 headset speaker： Output: 32 Ohm 1.2V interface:Pluggable terminal block 1 DSS key interface (4 lines): Indicator: Output 5.0V 5mA Interface:pluggable terminal block 1 way microphone input interface: Recommendation: Use an electret condenser microphone Sensitivity: -38dB, Impedance 2.2 K Ohm bias voltage 2.2V Interface:Pluggable terminal block 1 short circuit input and output interface (built-in relay): Relay: MAX DC30V / 1A, AC125V / 0.5A, Interface:pluggable terminal block 2 parallel power input interface: 12V-24V / 2A DC 1 road for the 5.5mm DC power seat 1 road way 2Pin pluggable terminal block Standby power consumption: DC12V 1.32W / POE 1.78W Housing material: aluminum alloy shell Installation: Indoor installation Operating temperature: -30 ~ 70 ℃ Storage temperature: -40 ~ 70 ℃ Relative humidity: 10% – 95% Equipment size: 113x83x28mm Packing size: 138x108x77mm Equipment weight: 250g
PA2
PA2 is a SIP video intercom & Paging device for industry application. The media stream transmission adopts standard IP/RTP/RTSP protocol. It inherits the advantages of the stability and the sound quality of FANVIL VOIP Phone. It is perfectly compatible with all the current SIP IPPBX /IMS platforms, such as Asterisk, Broadsoft, 3CX, Elastix, etc. It has various functions and interfaces, Such as Intercom, broadcast, video, security, recording, to adapt different application environment, you can very easy to DIY your video intercom & paging equipment. PA2 is the best choice for everyone.
PCS 35.1 OMR(Not Exists)
No Item Found
No comments were found